Curve purple

JumpShot™


Flexible Jumper Cables

The popular JumpShot series cable is a attractive alternative to semi-rigid cable especially when minimal flexure is desired. It uses the same simplified connectors and assembly tooling used for 0.086 and 0.141 versions of semi-rigid cables. This cable offers a suitable low cost solution in situations where compact interconnects are needed. The end user can effectively eliminate the cost of preparing cable bend drawings which preformed semi-rigid cables would require. Applications include stable ATE and test interconnects fixtures where cable movement and flexure is not constanly anticipated.

Electrical Data
Maximum Frequency: 18.0 GHz

Impedence: 50 Ω nominal

Propagation Velocity: 70% nominal

Time Delay: 1.47 ns/ft (4.82 ns/m)

Shielding Effectiveness:
-90 dB minimum (cable only)

Dielectric Withstanding Voltage:
B08: 1 kV at 60 GHz
B14: 3 kV at 60 GHz

Capacitance: 29 pF/ft (95.1 pF/m)

Mechanical Data
Finished Outer Diameter:
B08: 0.104 in (0.264 cm)
B14: 0.163 in (0.414 cm)

Static Bend Radius:
B08: 0.5 in (1.270 cm)
B14: 0.8 in (2.032 cm)

Weight with Standard Jacket/Armor:
B08: 0.01 lbs/ft (0.021 kg/m)
B14: 0.03 lbs/ft (0.048 kg/m)

Operating Temp. Range:
-85 to 392° F (-65 to 200° C)
Above 185° F (85° C) use "T" designation
Cable Construction
Inner Conductor:
Solid Ag-plated Cu-clad Steel

Dielectric: PTFE

Outer Conductor:
Ag-plated Cu Flat Braid/
Ag-plated Cu Round Braid

Standard Finish: FEP

(a wide variety of other protective finishes and armors available)

Available Connectors
B08: 3.5mm, BNC, MMCX, OSP, OSSP, SMA, SMB, SMC, SMP, SSMA, SSMB, SSMP, TNC, Type N, ZMA

B14: 3.5mm, BNC, SMA, TNC, Type N

(maximum frequency dependent on cable; other connectors available)

Specifications
For attenuation data and additional specifications refer to PDF datasheet.


JumpShot™